How To Make Memory wire Hoop Spike Earrings

 
Make a bold statement with this spike hoop earring. Made using memory wire antique silver plated spike charms. Diamante rhondells and metal spacer beads. Fine steel chain is added for a delicate touch.

You will learn how to turn a loop, and open and close jump rings.

You will need rounds nose pliers and chain nose pliers, and wire cutters.

This is for Beginners

Step one

Thread on your beads to the memory wire, the fine chain goes directly onto the wire.

Step two

Thread the memory wire through the link on the fine chain, you can thread it on first then cut to size, I found this easier. Alternate the silver and black chain.

Step three

Once all your beads are on, make loops on either side of the memory wire.

Step Four

Connect the loops together, you may want to make one loop slightly bigger than the other so they slot in easier. Make sure the loops are secure

Step Five

Now attach a jump ring to the loops, and the earwire.

Step Six

Repeat for the other earring.