How To Make...Mystic Black Charm Bracelet

1 Cut two small lengths of chain approx 8cm and 6cm, place the longer chain on the second link of the bracelet in from the end with a thick jump ring and the other end onto the 8th link and place on the shorter chain to the 3rd link and the 7th link.

1 With your left hand hold the jump ring steady using one of the flat nose pliers. Now using another pair of flat nose pliers, with your right hand, bring them towards you to open.

2 To make sure you get a really secure fit, close the jump ring making sure that the ends touch each other.

2 Take three headpins and thread on the 12mm Czech round ,6mm spacer beads and 3mm spacer on each headpin, make a wrapped loop attach a jump ring and place on a link along the bracelet with a thick jump ring. Repeat with three other headpins and the Black Swarovski and cream rose Swarovski, turn a loop and place alongside the first beads.

3 On the next four headpins, thread on a bead cap fimo flower, bead cap and 4mm lavender Swarovski, make a wrapped loop attach along the bracelet with a jump ring. Place alongside the other beads.

4 Attach the angel wings to a thin jump ring. Cut two 3cm lengths of chain, open a thick jump ring, thread on a piece of chain, the thin jump ring with the wings on it and the next length of chain, Repeat this with the other wings and attach to either side of the bracelet.

5 Cut two more bits of chain 2cms and 3 cms long, attach the two humming birds onto the end of each chain, thread onto a jump ring, and attach to the bracelet near to the end.

6 Attach all the other charms along the bracelet with jump rings.

Tips & Advice

Products Used

Tools Needed

Flat Nose

Round Nose

Wire Cutters