Jewellery Making Techniques>The Basics Jewellery Making Techniques>Turning Loops Jewellery Making Tips and Advice

Learn How To Make A Turn Loop Technique

• Kerri

The making of a turn loop can prove to be more difficult in reality than it is in theory. Using a pair of round nose pliers, follow the straightforward steps below to master the turn loop technique, which usually takes a little practice.

To control the length of your stem, position the wire on the thick area of the pliers; now bend the wire away from you to make a right angle.

Step 1

Step 1

Then trim the head pin, leaving approx 1 cm distance from the bend. Grip the pin at its end with round nose pliers

 Step 2

Step 2

Then roll your wrist to make a complete turn. Now you can re-adjust the pin so that the loop sits directly on top of the stem.

 Step 3

Step 3

Your loop is complete and ready to attach.

Your Buy List

Headpins & Eyepins

Headpins & Eyepins

 Flat Nose Pliers

Flat Nose Pliers

Chain Nose Pliers

Chain Nose Pliers

Wire Cutters

Wire Cutters

Back to blog